projectile motion

A forum set up for physics questions from students in the courses PHYS1121, 1131, 1221 and 1331 at the University of New South Wales. It is intended for questions that cannot readily be answered in class,
either because they fall outside the main syllabus and therefore would be distraction (however interesting) or for other reasons.

Moderator: msmod

Post Reply
Suvekchhya
Posts: 10
Joined: Sat Jun 07, 2014 7:13 pm

projectile motion

Post by Suvekchhya »

hey could i get help with this please?

A stone is projected at a cliff of height h with initial speed 42m/s at angle 60 degrees to horizontal. stone A lands after 5.5 secs at height 52 m. The max height reached is 68m. How do I find the speed of the stone just before impact?

Thankyou so much in advance
a.s.h.
Posts: 110
Joined: Tue Jan 28, 2014 3:50 pm

Re: projectile motion

Post by a.s.h. »

Once you have the equations of motions for vertical and horizontal components of velocity and displacement in terms of t, substitute y = 52 and t = 5.5 into the equation for y(t), where y is the height in metres and t is the time in seconds. This will let you solve for h, since h appears in the equation for y(t).

Now that you know h, set y(t) = 0 and solve this quadratic in t to find the time T when the stone hits the ground (at y = 0).

By the Pythagorean Theorem, speed at any time will be equal to sqrt(ẋ²+ẏ²), where ẋ and ẏ are the horizontal and vertical components of velocity, respectively. Since you have the equations of ẋ and ẏ as functions of time, substitute t = T (which you found) into the equations for ẋ(t) and ẏ(t), and then substitute these values into sqrt(ẋ²+ẏ²) to get the speed at the time of hitting the ground.

I think the speed at the time of impact was referring to when y = 0. If it was referring to when y = 52, you know t = 5.5, so use that value of t to get speed = sqrt(ẋ²+ẏ²).
Last edited by a.s.h. on Fri Jul 18, 2014 3:53 pm, edited 1 time in total.
User avatar
joe
Posts: 755
Joined: Fri Aug 29, 2003 11:57 am
Location: Sydney

Re: projectile motion

Post by joe »

Just adding to a.s.h.'s good explanation:

Once you have the time of impact, you don't need to use calculus to get the speed for this one. Neglecting air resistance,
v_x = constant = v0cos(launch angle)
v_y = v0sin(launch angle) - gt.
So, at any time t, just calculate v from sqrt(v_x^2 + v_y^2)

Joe
Post Reply